Table of Contents
Advertisement
Total For All Calls
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using
Credit Remaining
Displays the difference between
limit specified with
Set Total Charge Limit
limit,
No Charge Limit Set
Show Call Timers
This option allows you to display the duration of your calls and to
reset your time meters to zero.
If you receive the Advice of Charge service, all calls are timed.
Show Last Call
Displays the timed duration of your last call.
Total For All Calls
Displays the timed duration of all your calls since the time meter
was reset to zero using
Reset All Timers
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
58
Using the Options Menu
Reset Call Charges
.
Total For All Calls
and the
. If there is no
will be displayed.
.
jSet Audible Call Timers
Your phone provides two programmable audible call timers:
•
will sound a beep just once during a
Single Alert Timer
call, after a preset time has elapsed.
•
Repetitive Timer
will sound regular beeps during a call, at
preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Set In-Call Display
Use this option to display the time or charge meters during calls.
If you do not have the Advice of Charge service, only the time
meter is available.
If a total charge limit has been set and charge meter has been
A
selected, then the in-call display will always display Credit
Remaining.
No In-Call Display
Switches off any in-call displays whether charge or time meter.
Show Time Per Call
Displays the time meter during calls. If you receive the Advice of
Charge service, only the chargeable calls will be displayed.
Advertisement
Table of Contents
