Motorola PCS telephone Quick Reference page 47

Cell Broadcast Messages
These are general messages, broadcast to a group of phones and
can only be received when your phone is in standby mode.
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Typical Cell Broadcast channels have information on local
weather conditions, traffic reports, or stock market prices.
Please contact your network operator for a list and description
of available channels.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
How to Read SMS Messages
You can use the scroll keys (M, < and >) to scroll
through messages in either the Received Messages or Outgoing
Messages lists.
To display a specific message, enter the message number. For
example, press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number
Alternatively, to display the next message, press O and select
Go To Next Message .
How to Create and Edit SMS Messages
will be displayed.
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see 'How to Enter Alphabetic Characters' on
page 32 of What is the Phone Book?
Press O once you have completed your message. You will
then be presented with the following options:
- If you select this option you will be prompted
Send Message
for a phone number. Enter the number and then press O
to send the message.
Dialing prefixes and area codes may be required.
A
- Select this option to store your edited
Store Message
message in your Outgoing Messages list.
If you don't store the message after it has been edited, you
A
will lose all your changes as soon as you select another
message to be edited.
Using the Options Menu
45