Motorola PCS telephone Quick Reference page 14

Fitting a Battery to Your Phone
Fitting a Main Battery
Position the battery as illustrated in the following diagram, and
snap-lock it into place.
Fitting an Auxiliary Battery
1 Place the hook on the battery into the slot on the back of the
phone.
2 Pull the battery towards the bottom of the phone until the
two pins click into place.
12
About Your Phone, Battery, and SIM Card
Removing a Battery from Your Phone
Removing a Main Battery
To remove a main battery, press the battery release latch and lift
the battery out, away from the phone.
Removing an Auxiliary Battery
To remove an auxiliary battery, slide the battery down until the
two pins are released from the base of the phone, and then lift
the battery off.
Battery Performance and Maintenance
Your phone may have come with one or more of the following
battery types. The part numbers listed are for charcoal batteries.
The talk-time and standby-times given are typical performance
figures:
Battery Type Part
Number
Slim Main SNN 4810
500 mAh Li-Ion
Extra Cap Main SNN 4815
900 mAh Li-Ion
Standard Main SNN 4905
500 mAh NiMH
Slim Aux SNN 4868
900 mAh Li-Ion
a. Talk-times are specified for with and without DTX.
b. All times are approximate and depend on network, signal strength and features
selected. Standby-times are specified for DRX=2 to DRX=9.
Talk-Time a Standby-Time b
up to: up to:
135-165 min. 39-48 hours
250-310 min. 72-88 hours
135-165 min. 39-48 hours
220-275 min. 65-78 hours