Hold - Snom M65 User Manual

User Manual M65 / M85 / M25
3. Press the function key underneath "Transfer". The phone of the third party begins to ring.
4. Press the function key underneath "Exit".
Note: If you do not press "Exit", your display will announce that your call has ended
when the third party picks up the ringing call.

Hold

When you are in a call, press the function key underneath "Hold" to put the call on hold (Fig. 1). Press
the function key underneath "Retrieve" to resume the call (Fig. 2).
Fig. 1
With the call on hold you can call another number to confer with that party, for example if you want to
transfer the held call or if you want to initiate a conference with both parties.
Swapping calls
M65/M85
When you have one call on hold and you are connected to a second call, press the function key
underneath "Swap" to connect to the held call and put the connected call on hold (Fig. 3).
M25
When you have one call on hold and you are connected to a second call, press the right rim of the
navigation key to connect to the held call and put the connected call on hold.
Conference
When you are connected to two parties, one on hold and one on the line, press the function key
underneath "Conf." (Fig. 4) to start the conference.
Press the red key
Fig. 2 Fig. 3
to terminate the conference and the connection to both parties.
Fig. 4
70
Appendix 1