Bluetooth - Snom M65 User Manual

User Manual M65 / M85 / M25
Turning call forwarding on
1. Select the forwarding event.
Fig. 10
2. Press the function key underneath "On".
Note: If you need to change the forwarding number and - in the case of Forward No
Answer - the number of seconds, see "Settings" on page 53.
3. Press the red key
Turning call forwarding off
1. Select the forwarding event.
Fig. 13
2. Press the function key underneath "Off".
3. Press the red key

Bluetooth

The M85 handset can be used with a Bluetooth headset which must be paired with the handset first.
When the headset has been paired, it is added to the list of Paired Devices. The connection to the
headsets on this list can be disconnected and reestablished by one key press without having to go
through the pairing process manually.
The default Bluetooth setting is disabled. To be able to use Bluetooth, the function must be enabled.
To save battery power and avoid unnecessary radiation, however minimal, you may want to disable
Bluetooth when you are not using it. When Bluetooth is enabled, the Bluetooth logo
right of the signal strength indicator in the top line of the display.
Fig. 11 Fig. 12
three times to return to the idle screen.
Fig. 14 Fig. 15
three times to return to the idle screen.
59
Getting to know
is shown to the