Alphanumeric Keys; Entering Phone Numbers (Numeral Mode); Letter Modes - Snom M65 User Manual

User Manual M65 / M85 / M25

Alphanumeric keys

These keys are used to enter numerals and letters.
• When entering characters in letter mode, pause briefly after each character until the cursor has
moved forward. Pausing is not necessary when entering numerals in numeral mode.
• Press the function key underneath "Clear" to delete the character to the left of the cursor.
• Keys 2 - 9 can also be used to speed dial contacts. For more information, see "Speed dial" on page
47 and "Speed dialing a contact" on page 66.

Entering phone numbers (numeral mode)

When you are entering numbers, whether dialing or editing the phone numbers of one of your
contacts, only the numerals 1-9 and 0 and the asterisk * and the pound/hash # symbols will be
accepted by the phone. Letters, special symbols, and spaces are not available.
• Pausing between characters is not necessary when entering numerals in numeral mode (fig 1).
The cursor will move forward without delay (fig 2).
• Press the function key underneath "Clear" to delete the character to the left of the cursor.
Fig. 1

Letter modes

When editing the names in your contacts, pause briefly after each character (Fig. 1, below) until the
cursor has moved forward (Fig. 2).
Fig. 1
Fig. 2
Fig. 2 Fig. 3
38
Getting to know