Ring Melody; Vibrator; Alarm Clock Settings - Snom M65 User Manual

User Manual M65 / M85 / M25

Ring melody

Twenty (20) ringtones are available (FW v3.24 and higher; six (6) ringtones in lower FW versions).
Please note that these ringtones can be set for calls in general and for individual contacts to
announce ringing calls from selected phonebook entries.
• Scroll to a ringtone and press the function key underneath "Play" to listen to the ringtone. The text
above the key changes to "Stop". Press the key again to stop the playing of the ringtone.
• Press the function key underneath "Select" to set the highlighted ringtone.

Vibrator

M65/ M85 only
Three vibration settings are available.
• Vibrate then ring: The handset will vibrate four times,
then start ringing.
• Vibrate only
• Vibrate and ring: The handset will simultaneously ring and vibrate.
The default setting is off. If you want to change the setting, scroll to a different one and press the
function key underneath "Select".
A
larm clock settings
M65/M85 only
The phone has two alarm clock settings and a snooze setting that applies to both. The clock symbol
in the top line on the display indicates that an alarm setting is active (Fig. 1). When the alarm goes off,
the display indicates the time the alarm is set for (Fig. 2).
Fig. 1 Fig. 2
62
Getting to know