Fkey numbering when D7 is connected to 76x phones ...........18 Fkey numbering when D7 is connected to 72x phones ...........19 Fkey numbering when D7 is connected to 71x phones with USB port ....19 Fkey numbering when D7 is connected to D375 ............19 XML provisioning of settings ..................20...
All other product names and names of enterprises are the property of their respective owners. Product specifications are subject to change without notice. Snom Technology AG reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact.
Follow the instructions in this manual and other applicable documentation of the device. • For use with Snom 7xx and 3xx phones with USB ports only. Do not connect the device to a PC or to other phones! •...
Power: Via attached USB cable; if more than one module is attached to one phone, the • separately available power adapter PSAC10R-050 (Snom PN 00002730) is needed. isposal of the device This device is subject to European Directive 2002/96/EC and may not be disposed of with general household garbage.
D7 User Manual Setting up the Expansion Module etting up the expansion module elivery Content ◦ Base unit with attached USB cable with type A plug ◦ Footstand ◦ Connector ◦ Quick Installation Guide ttaching the footstand The footstand can be attached at two different angles: 28° and 46°.
Connecting one expansion module 1. Insert the USB plug attached to the cable of the Snom D7 into the USB port on the Snom phone. If the phone has two USB ports, either one of them can be used (Fig. 5 and Fig. 6).
USB hub or, if the phone has more than one USB port, do not connect expansion modules to more than one port (Fig. 8). ◦ The separately available power adapter PSAC10R-050 (Snom PN 00002730) must be attached to the second module in the chain, as shown in Fig. 7. Snom Phone Fig.
USB hub or, if the phone has more than one USB port, do not connect expansion modules to more than one port (Fig. 8). ◦ The separately available power adapter PSAC10R-050 (Snom PN 00002730) must be attached to the second module in the chain, as shown in Fig. 9. Snom phone Fig.
• If the Snom phone has two USB ports, the USB adapter of the USB headset can be inserted into the USB port on the expansion module or into the free USB port on the phone (Fig. 12 or 13, respectively).
• If the Snom phone has two USB ports, the USB adapter of the USB headset can be inserted into the free USB port on the last module in the daisy-chain or into the free USB port on the phone (Fig.
For more information on the available functions and on how to program and use the keys, please refer to the phone's manual, chapter "Programming the Function Keys". You can download the manual at http://wiki.snom.com. isplay Layout Fig.
D7 User Manual Getting to Know your Expansion Module Fig. 18 Fig. 19 Fig. 20 Fig. 21 ◦ Alternative method: Use the navigation key to select the expansion module and press change it and save the change simultaneously. 7. Press for 3 seconds to return to the idle screen.
Presence key on the connected phone will. For more information, please refer to the snom UC edition User Guide for the phone. For more information on the available functions and on how to program and use the keys, please refer...
For more information on the available functions and on how to program and use the keys, please refer to the phone's manual, chapter "Programming the Function Keys". You can download the manual at http://wiki.snom.com. Fig. 23 - Snom phone with one connected D7 expansion module...
Settings on the web interface When a D7 module is connected to the phone, its function keys are displayed on the function key page of the phone's web interface. If there is more than one module, the first module in the daisy chain is listed as expansion module 1 on the function key page, the second module in the chain is listed as expansion module 2, and the third module in the chain as expansion module 3.
Page 17
Note for 3xx phones with USB ports: If there are any Expansion Modules V2.0 for 3xx phones connected to the phone, they will be shown as Expansion Modules 1 - 3 on the Function Keys page above the first D7. For more information, see "Fkey numbering when D7 is connected to D375" on page 19.
4. Press the number of the key on the keypad. If you want to configure the setting for the top left key on the first expansion module of a snom 760, for example, enter "17" on the keypad. 5. Select the Function for key 20.
When there are 3xx expansion modules connected to the phone, their total number of keys is added to the fkeys list of the phone before the first key for the first D7 Expansion Module (see also "Fkey numbering system on D375" on page 23). D375...
The XML tags of the function keys are an exception from the general rules for XML mass provisioning of settings for snom phones because the tag for each key specifies the exact settings for that particular key. The format is as follows: <fkey idx="n"...
D7 User Manual Configuring the Function Keys Function Key Numbering System PUI: Phone user interface (Settings > 1 Preferences > 6 Fkeys) WUI: Web user interface (phone's web interface > Function Keys page) fkey idx: XML mass provisioning Phone...
Page 22
D7 User Manual Configuring the Function Keys 715/D715 720/725/D725 760/765/D765 fkey idx fkey idx fkey idx Expansion Module 2 Expansion Module 3...
Fkey numbering system on D375 Function key numbering with 0, 1, 2, or 3 Expansion Modules V2.0 (3xx expansion modules) connected to the phone. See also "Fkey numbering when D7 is connected to D375" on page 19. PUI: Phone user interface (Settings > 1 Preferences > 6 Fkeys) WUI: Web user interface (phone's web interface >...