Synapse Interface - Symbol DIGITAL DS6708 Product Reference Manual

Synapse Interface

Parameter # F0h, ACh
The auto-detection of a Synapse cable varies in duration depending on the type of Synapse connection. If you
connected a digital scanner to another scanner using a Synapse cable, use the Auxiliary Synapse Port connection.
In all other cases, when using the cable, the default setting is recommended.
To disconnect and reconnect the digital scanner from a Synapse cable that is connected to a live host via a
Synapse, use the "Plug and Play" setting. Do not change this setting from the default if an on-board wedge host is
enabled.
*Standard Synapse Connection
(01h)
"Plug and Play" Synapse Connection
(0Ah)
User Preferences & Miscellaneous Digital Scanner Options 4 - 21
Auxiliary Synapse Port Connection
(32h)