User Preferences; Set Default Parameter - Symbol DIGITAL DS6708 Product Reference Manual

4 - 4 Symbol DS6708 Digital Scanner Product Reference Guide

User Preferences

Set Default Parameter

Scan this bar code to return all parameters to the default values listed in
You can reset the digital scanner to two types of defaults: factory defaults or custom defaults. Scan the appropriate
bar code below to reset the scanner to its default settings and/or set its current settings as custom defaults.
•
Restore Defaults - Scan this bar code to reset all default parameters as follows.
• If you previously set custom defaults by scanning Write to Custom Defaults, scan Restore Defaults to
retrieve and restore the decoder's custom default settings.
• If you did not set custom defaults, scan Restore Defaults to restore the factory default values listed in
Table A-1.
•
Set Factory Defaults - Scan this bar code to restore the factory default values listed in
deletes any custom defaults set.
•
Write to Custom Defaults - Scan this bar code to set the current decoder settings as custom defaults. Once
set, you can recover custom default settings by scanning Restore Defaults.
*Restore Defaults
Write to Custom Defaults
Table A-1 on page A-1.
Table A-1.
Set Factory Defaults
This