Keyboard Wedge Parameter Defaults - Symbol DIGITAL DS6708 Product Reference Manual

Turn off the host and unplug the keyboard connector.
1.
Attach the modular connector of the Y-cable to the cable interface port on the digital scanner. See
2.
Interface Cable on page 1-3.
Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.
3.
Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.
4.
If needed, attach the optional power supply to the connector in the middle of the Y-cable.
5.
Ensure that all connections are secure.
6.
Turn on the host system.
7.
Select the Keyboard Wedge host type by scanning the appropriate bar code from
8.
Types on page
To modify any other parameter options, scan the appropriate bar codes in this chapter.
9.

Keyboard Wedge Parameter Defaults

Table 10-1 lists the defaults for Keyboard Wedge host parameters. To change any option, scan the appropriate bar
code(s) in the Keyboard Wedge Host Parameters section beginning on page 10-5.
NOTE See
miscellaneous default parameters.
Keyboard Wedge Host Default Table
Table 10-1
Parameter
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type
Country Types (Country Codes)
Ignore Unknown Characters
Keystroke Delay
Intra-Keystroke Delay
Alternate Numeric Keypad
Emulation
Caps Lock On
Caps Lock Override
Convert Wedge Data
10-5.
Appendix A, Standard Default Parameters
IBM PC/AT& IBM PC Compatibles
North American
Transmit
No Delay
Disable
Disable
Disable
Disable
No Convert
Keyboard Wedge Interface 10 - 3
for all user preferences, hosts, symbologies, and
Default
10-5
10-6
10-8
10-8
10-9
10-9
10-10
10-10
10-11
Installing the
Keyboard Wedge Host
Page
Number