Convert All Bar Codes To Code 39 - Symbol DIGITAL DS6708 Product Reference Manual

9 - 8 Symbol DS6708 Digital Scanner Product Reference Guide

Convert All Bar Codes to Code 39

By default, the Wand Emulation interface sends data to the attached host in the decoded symbology. This can be a
problem for customers with older systems that do not recognize newer symbologies (for example, GS1 DataBar).
Enable this parameter to ignore the decoded symbology, and transmit the data as a Code 39 bar code. Lowercase
characters in the original data stream transmit as uppercase characters. This also allows ADF Formatting.
Enable Ignore Unknown Characters to replace any characters that do not have a corresponding character in the
Code 39 symbology set with a space.
If you disable Ignore Unknown Characters, when the digital scanner encounters characters that do not have a
corresponding Code 39 character, it emits an error beep and transmits no data.
NOTE ADF Note: By default, the Wand Emulation interface does not allow ADF rules to affect scanned data.
Enabling this parameter allows ADF rules to affect scanned data (Chapter 15, Advanced Data Formatting).
Enable Convert to Code 39 for Wand Host
*
Disable Convert to Code 39 for Wand Host