ECS BAT-I2 User Manual page 45

Parallel Port Configuration
Scroll to this item and press <Enter> and view the following screen.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Chipset
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Parallel Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Device Mode (Standard Parallel...)
This item is used for Printer port mode selection, it can be set to Standard Parallel
Port Mode (SPP) or EPP Mode.
Press <Esc> to return to the Super IO Configuration page.
M.I.B III Security Boot Exit
[Enabled]
IO=378h; IRQ=5;
[Auto]
[Standard Parallel...]
BAT-I2 USER MANUAL
Enable or Disable Parallel
Port (LPT/LPTE)
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
41