Advertisement
2. Fit the outlet on top of range hood body.
3. Install the range hood onto the bottom of cabinet board, fasten 6pcs Screw (M4x35mm) with washers. If gap
is there between range hood back and cabinet end, fasten 2pcs Screw (ST3x12mm) and metal plate onto
body to fill it.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards
Installation of charcoal filters
When you choose front recirculation mode, charcoal filter is a must to be installed. Charcoal filter is optional
accessory.
1. Remove grease mesh filters.
2. Follow up below instruction you can remove or install charcoal filters.
9
Advertisement
