Phonebook - Panasonic KX-TGE260 Operating Instructions Manual

Phonebook

You can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 34). The
following groups are available:
*1
– Group 1: "Home" (default)
– Group 2: "Cell 1"
– Group 3: "Cell 2"
– Group 4-9: You can change the group
name for each group.
*1 For groups 1-3, the group names cannot
be changed.
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit's
phonebook (page 52).
Adding phonebook entries
1
MFN W a MMENUN
2
MbN: "Add new entry" a MSELECTN
3
Enter the party's name. a MOKN
4
Enter the party's phone number. a MOKN
5
MbN: Select the desired group. a
MSELECTN 2 times
6
MOFFN
Storing a redial list number to the
phonebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
n When a cellular phone is paired:
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MMENUN
3
MbN: "Save" a MSELECTN
4
To store the name, continue from step
3, "Editing entries", page 35.
For assistance, please visit http://www.panasonic.com/help
TGE26x_27x(en)_0123_ver110.pdf
*1
*1
33
n When a cellular phone is not paired:
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MSAVEN
3
To store the name, continue from step
3, "Editing entries", page 35.
Storing caller information to the
phonebook
n When a cellular phone is paired:
1
MCN CID
2
MbN: Select the desired entry. a
MSELECTN
R To edit the number, press * (Edit)
repeatedly until the phone number
is shown in the desired format.
3
MSAVEN
4
MbN: "Phonebook" a MSELECTN
5
Continue from step 3, "Editing entries",
page 35.
n When a cellular phone is not paired:
1
MCN CID
2
MbN: Select the desired entry. a
MMENUN
R To edit the number: MbN: "Edit" a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
desired format. And then, press
MSAVEN. Go to step 4.
3
MbN: "Save CID" a MSELECTN
4
MbN: "Phonebook" a MSELECTN
5
Continue from step 3, "Editing entries",
page 35.
Character table for entering names
While entering characters, you can switch
between uppercase and lowercase by
pressing * (A®a).
Key Character
1 & ' (
– . /
Phonebook
) H ,
1
33
2015/01/23 9:57:42