Panasonic KX-TGE260 Operating Instructions Manual page 50

Caller ID Service
– a specific line is set to make cellular
calls (page 21).
5
MbN: Select the desired cellular phone. a
MSELECTN
n Using the landline
1
MCN CID
2
Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3
To call back, press M
To exit, press MOFFN.
Note:
R If the entry has already been viewed or
answered, " " is displayed.
R or indicates the caller information
was received from the cellular line.
Using the Smart function key
When "Missed call" is displayed and the
indicator flashes slowly, there are missed
calls.
Press M N in step 1 on "Viewing the caller
list and calling back", page 49.
R "Missed Call" must be set to "On" in
"Setting the Smart function key", page 17.
R If the handset is placed on the base unit or
charger, you need to lift up the handset to
view the caller list after pressing M
R When the unit has new messages, new
voice mail messages, and missed calls, the
unit can be operated to play the new
messages first, play the new voice mail
messages next, and then show the missed
calls.
Editing a caller's phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code "1".
n When a cellular phone is paired:
1
MCN CID
2
MbN: Select the desired entry. a
MSELECTN
3
Press * (Edit) repeatedly until the
phone number is shown in the desired
format.
For assistance, please visit http://www.panasonic.com/help
50
TGE26x_27x(en)_0123_ver110.pdf
4
n When a cellular phone is not paired:
1
2
N.
3
4
5
Caller ID number auto edit feature
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller's phone
N.
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller's area
code are edited automatically.
This feature can be set for each unit
(page 43). The default setting is "On".
Note:
R Phone numbers from the 4 most recently
edited area codes are automatically edited.
50
Using a cellular line:
To make a cellular call, continue from
step 4, "Viewing the caller list and
calling back", page 49.
Using the landline:
M N
MCN CID
MbN: Select the desired entry. a
MMENUN
MbN: "Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format.
M N
2015/01/23 9:57:44