Answering Calls; Useful Features During A Call - Panasonic KX-TGE260 Operating Instructions Manual

2
MbN: Select the desired phone number.
3
M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 35).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.

Answering calls

When a call is being received, the ringer
indicator and indicator flash rapidly.
1
Lift the handset and press M
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 43).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Using the Smart function key
When the indicator flashes rapidly, press
M N.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 16).
For assistance, please visit http://www.panasonic.com/help
TGE26x_27x(en)_0123_ver110.pdf
Making/Answering Calls Using the Handset
You can finish talking by pressing MOFFN
without lifting up the handset.
Adjusting the handset ringer volume
Press MjN or MkN repeatedly to select the
desired volume while ringing.
Useful features during a
call
Hold
1
N
2
3
N or MZN
Note:
R After holding for 10 minutes, the call is
disconnected.
N.
Mute
1
2
Note:
R MMUTEN is a soft key visible on the display
during a call.
23
Press MMENUN during an outside call.
MbN: "Hold" a MSELECTN
To release hold on the cellular line:
*1
Press MCELLN.
R Another handset user can take the call
*1
by pressing MCELLN.
*1 If you press MCELLN and the
selection list is displayed, select
the desired cellular line and press
MSELECTN.
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
(KX-TGE270 series: page 3)
To release hold on the landline:
Press M N.
R Another handset user can take the call
by pressing M N.
R The base unit user can take the call by
pressing MZN. (KX-TGE270 series:
page 3)
Press MMUTEN during a call.
To return to the call, press MMUTEN.
23
2015/01/23 9:57:41