Panasonic KX-TGE260 Operating Instructions Manual page 30

Making/Answering Calls Using the Base Unit
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3
To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Transferring a cellular call
between the base unit and a
cellular phone
Transferring a cellular call from the
base unit to a cellular phone
During a cellular call, press and hold MCELL
1N or MCELL 2N until the SP-PHONE indicator
goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
cellular phone to the base unit
During a conversation using a cellular phone,
press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the base
unit.
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 41).
For assistance, please visit http://www.panasonic.com/help
30
TGE26x_27x(en)_0123_ver110.pdf
Answering a 2nd call during a
landline call
1
2
3
Answering a 2nd call during a cellular
call
1
2
3
30
Press MHOLDN during a landline call.
To answer the 2nd call:
Press MCELL 1N or MCELL 2N.
To hang up the 2nd call and return to the
1st call (landline call), press MZN 2 times.
Press MHOLDN during a cellular call.
To answer the 2nd call:
MZN, MCELL 1N, or MCELL 2N
To hang up the 2nd call and return to the
1st call (cellular call), press MZN, then
press MCELL 1N or MCELL 2N.
2015/01/23 9:57:42