Ordering Replacement Parts; Important Note About Fiberglass - Dynaflite Bird of Time Instruction Manual

To order replacement parts for the Dynaflite Bird of Time ARF , use the order numbers in the
Replacement Parts List that follows. Replacement parts are available only as listed. Not all parts are
available separately. Replacement parts are not available from Product Support, but can be purchased
from hobby shops or mail order/Internet order firms. Hardware items (screws, nuts, bolts) are also
available from these outlets. If you need assistance locating a dealer to purchase parts, visit
www.dynaflite.com and click on "Where to Buy". If this kit is missing parts, contact Dynaflite
Product Support.
Order Number
DYFA6550 ..................Fiberglass Fuselage
DYFA6551 ..................Wing Kit with Joiners
DYFA6552 ..................Tail Surface Set
DYFA6553 ..................Canopy
DYFA6554 ..................Decal Sheet
IMPORTANT NOTES ABOUT WORKING WITH FIBERGLASS
If you have never worked with fiberglass there are a few basic things you should be aware of:
•When you are cutting into fiberglass, be sure you
are cutting the correct place. Unlike wood, you are
not able to go back and easily fix a mistake.
• Whenever you are gluing a part to the inside
of fiberglass it is important to roughen the
inside surface of the fiberglass with 80-grit
sandpaper and then wipe the area with
rubbing alcohol. The molding process leaves a
waxy residue that can prevent a good bond
between the glue and the parts being glued.
Inch Scale
0" 1"
0 10 20 30
Metric Scale

ORDERING REPLACEMENT PARTS

REPLACEMENT PARTS LIST
Description
Missing pieces
Instruction manual
Full-size plans
2"
40 50 60 70
WARNING: The fuselage included in this kit is
made of fiberglass, the fibers of which may
cause eye, skin and respiratory tract irritation.
Never blow into a part to remove fiberglass dust,
as the dust will blow back into your eyes. Always
wear safety goggles, a particle mask and rubber
gloves when grinding, drilling or sanding
fiberglass parts. Vacuum the parts and the work
area thoroughly after working with fiberglass.
3" 4"
80 90 100 110 120 130 140 150
5
How to Purchase
Contact Product Support
Contact Product Support
Not available
Contact Your Hobby
Supplier to Purchase
These Items
5" 6"