Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zephyr ZTR-M90S
Summary of Contents for Zephyr ZTR-M90S
- Page 1 FEB08.0101...
- Page 2 ZTR-M90S...
-
Page 3: Table Of Contents
CONTENTS INSTALLATION Mount heights & clearance Ducting 1,2,3 Specifications Electrical Mounting the hood Ductless Conversion Carbon Filters FEATURES & CONTROLS Touch controls & features Advance display functions Filter change indicator Filter clean indicator 8,10 Remote Feature MAINTENANCE Cleaning Lights replacement WARRANTY Coverage &... -
Page 4: Installation
INSTALLATION MOUNT HEIGHTS & CLEARANCE Minimum mount height between range top to hood bottom should be no less than 28". Maximum mount height should be no higher min. 32.5"-max. 35.5 min 36.5" - max 38.5" than 36". It is important to install the hood at the 6.5"... -
Page 5: Ducting 1
INSTALLATION DUCTING WARNING FIRE HAZARD NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,attics or garages. All exhaust must be ducted to the outside. Use Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or DuctTape. Some Ducting Options: Roof Pitch w/ Flashing &... -
Page 6: Ducting 1
INSTALLATION DUCTING Crawl space Air register 6" to 3-1/4 x 10" elbow adaptor. Ductless Re-circulating option... -
Page 7: Specifications
INSTALLATION SPECIFICATIONS 1", 2", 3" 35.5" 32-1/2" 26" 29" 6-1/2" 36" 25-3/4" ELECTRICAL WARNING All Electrical work must by performed by qualified electrician or person with similar technical know how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. -
Page 8: Mounting The Hood
INSTALLATION INSTALLATION Add Blockings Fasten Support Frame Mounting the Range Hood 1. Add and secure blocking (minimum 2x4 studs) onto ceiling joist. 2. Fasten round ceiling plate directly onto ceiling joist or stud blocking. 3. Install duct work & electrical. 4. - Page 9 INSTALLATION INSTALLATION Mounting the Range Hood 6. Attach cover strip with supplied screws.
-
Page 10: Ductless Conversion
INSTALLATION DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. Fumes and exhaust from cooking is drawn and filtered by a set of optional Carbon Filters. The air is then purified and re-circulated back within the home. -
Page 11: Touch Controls & Features
CONTROLS & FEATURES TOUCH CONTROLS & FEATURES Blower On/Off Display (Speed level, Delay Off Indicator, Filter Clean/ Change) Lights On/Off/ Hold to Dim Adjust 6 Speed Levels 15 Min Delay Off Blower On/Off By pressing , the blower is switched On and Off. When switched on, the blower starts up on speed level 3. Speed Selection The 6 speed levels are selected by pressing to decrease and... - Page 12 CONTROLS & FEATURES CONTROLS: FILTER CHANGE INDICATOR (CARBON FILTERS) Filters Change Reminder (Carbon, if fitted): When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon Filters to purify exhaust and fumes from cooking, and re-circulates the air within the home. These Carbon Filters are required to be replaced after every 120 hours of use.
- Page 13 CONTROLS & FEATURES CONTROLS: FILTER CLEAN INDICATOR (METAL FILTERS) Filter Clean Reminder (Standard Metal Filters fitted) Whether your hood is installed as an Exhaust or Purifying unit, a set of metal filters are fitted by the factory. These Metal Filters are intended to filter out residue from cooking. It need not be replaced on a regular basis but are required to be kept clean.
-
Page 14: Remote Feature
CONTROLS & FEATURES REMOTE FEATURE: TOUCH CONTROLS Infrared Receiver / Transmitter: By aiming the infrared transmitter (located at the top of the remote control) to the infrared receiver (located above the touch controls on the range hood) you can control the following features remotely: Lights On/Off Hold to Dim Adjust 6 Speed Levels Blower On/Off... -
Page 15: Maintenance
MAINTENANCE CLEANING Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent (e.g. comet powder scrub, EZ-Off oven cleaner), or steel wool/scoring pads which will scratch and damage surface. For heavier soil use liquid degreaser such as 'Formula 409' or 'Fantastic' brand cleaner. After cleaning, you may use non abrasive stainless steel polish/ cleaners such as 3M or ZEP, to polish and buff out the stainless luster and grain. -
Page 16: Lights Replacement
MAINTENANCE LIGHTS Replacing Light Bulbs CAUTION: Light bulb becomes extremely hot when turned on. DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns. Make sure all power is turned off and bulbs are not hot. Carefully pry trim (w/ glass) off the socket module. - Page 17 Zephyr Corporation (referred to herein as “we” or “us”) warrants to the original consumer purchaser (referred to herein as “you” or “your”) of Zephyr products (the “Products”) that such Products will be free from defects in materials or work- manship as follows: Two Year Limited Warranty for Parts: For two years from the date of your original purchase of the Products, we will provide, free of charge, Products or parts to replace those that failed due to manufacturing defects.
- Page 18 TO OBTAIN SERVICE UNDER WARRANTY or any Service Related Questions, please call: 1-888-880-8368 Have your product proof of purchase with date ready for warranty issues. Or write to: Zephyr Corporation Service and Warranty Department 395 Mendell Street San Francisco, CA 94124...