М1» (Main Additional) - AKA SOREX PRO Operating Manual

Table of Contents

Advertisement

would give you the full information on the size and relative target depth.
Even two-target detection with one identification signal would be possible, but this is an
exigeant stunt. We recommend to set the threshold tone sensitivity to 16-17 in clear
areas and reduce it to the comfortable level in trashy areas.
Maximum values of threshold tone sensitivity exceed device ability to identify
target metal. That is why it may be applied for the search of metal objects at depths
impenetrable for the identification, when any metal object detection is essential.
General Boost (Gen. Boost) of searchcoil signal
of objects located close to each other is more important. In most cases we recommend
to set value to 6.
Left discriminator border
to the left of this border do not give sound response. VDI by regulated border is shown in
the frame.
Right discriminator border
with VDI located to the right of this border do not give sound response.
Hodograph of the objects cut by the discriminator will be shaded VDI by
regulated border is shown in the frame.
«М1» (main additional)
To enter the «M1» menu press and hold
button several times
pressing
and
of the setting.
AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru aka_md@mail.ru
Selective Metal Detector SOREX PRO. Operating manual.
signal boost for the detection channel (Threshold tone) and
identification channel (ST Sensitivity) simultaneously. Such
setting may be used in extremely trashy areas, beaches etc,
when there is no need in a great search depth, and distinction
Use buttons
sector border. All targets with VDI, as well as hodographs,
located to the right of this border, will give the sound signal
when they are detected by the device. Targets with VDI located
Use buttons
discrimination sector border. All targets with VDI, as well as
hodographs, located to the left of this border, will give the
sound signal when they are detected by the device. Targets
several times on the device panel. Set up parameters -
Press for exit
.
Option allows to regulate searchcoil
and
to set up left discrimination
and
To browse its entries press
.
or automatic exit 7 seconds after the end
to set up right
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents