AKA SOREX PRO Operating Manual page 4

Sorex PRO is able to process signals with three independent algorithms.
The first one is – MSF. This is a traditional and widely used in previous models
medium speed algorithm for general use. It is intended for slightly trashy areas.
The second one is – SSF. The main feature of this algorithm is better detection of
magnetic properties of metal objects, especially flat ones (iron plugs, tin pieces etc),
which are often mistaken for nonferrous objects. The algorithm has significantly longer
sound response delay. It is intended for the search in non-trashy areas.
The third
search filtering FSF). Its main feature is fast signal processing. It is intended for trashy
areas. This algorithm incorporates new concept with fastest processing of searchcoil
signals from close targets. Its noteworthy feature is absence of sound response delay,
which exists in SSF and MSF algorithms.
So, Sorex PRO is a multi-frequency detector. It has a wide range of coils of
different sizes and frequencies. It has several switchable main algorithms of signal
processing which allows device adjustment for various search conditions: from trashy
areas to deep search of single targets. The device equipped with 15DD-3kHz searchcoil
may detect soldier's helmet down to 1.4 m). The device is light (about 0.7 kg without
the searchcoil) and it can be equipped with various types of shaft, including extendable
arms providing "no-disassemble portability" option. With all these features Sorex PRO
becomes one of the most versatile detectors with record-breaking detection depth and
unique identification capabilities.
Moreover, we are pleased to inform you that this model was updated to simplify
its usage and increase the comfort of search.
1. We have updated ground balancing system. From now on the GB phase executed
right after the searchcoil adaptation shall be taken as 0 by default. All current
balance corrections performed during the search shall be calculated from this
predefined phase zero-level. You have to admit that all phase "deviations" of the GB
are better traced by the 0, it would facilitate the control over the quality of the
balance. In other words, we have resolved the similarity issue. The GB phase level
was standardized for all devices..
2. Sorex PRO has a fully automatic searchcoil adaptation system. It means that the
device automatically recognizes a new searchcoil installed instead of the old one
operating with different frequency. The device detects such searchcoil and initiates
adaptation program.
3. Sorex PRO is first device in the product line with search programs switchable on the
fly and independent settings. There is no need to reset the device when search
conditions change.
4. Moreover, the additional programmable multi-functional F button was added to
facilitate operation. You can assign an operation for this button. F can be assigned
for quick MA switch, change of sound indication type, change of short tone types and
quick "Economy" mode start.
The layout of the device menu is worth describing. Unlike previous models of the
5.
product line this device has six page menu with immediate access to each page. All
pages are theme-based: main menu, special (S) menu, audio (A) menu, video (V)
menu. It increased intuitive perception of the menu, decreased setting search time
and accelerated adjusting speed.
AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru aka_md@mail.ru
4
Selective Metal Detector SOREX PRO. Operating manual.
switchable algorithm is
M/T (metal trash or fast dimensional harmonic