Additional Menu; Quick Review Of Settings Status - AKA SOREX PRO Operating Manual

Additional menu

Sorex Pro has the additional menu extending sound indication capabilities and
including ground balancing automatic tuning option.
To enter additional menu in any menu press and hold
entries press
or
the parameter selected in the submenu press
and enter the menu, to exit the menu and enter the search mode press
Menu entries:
1. Tone borders (Border 2, Border 3, Border 4);
2. Tone tuning (RT Frequency, LT Frequency, Frequency 2, Frequency 3, Frequency
4, Frequency 5);
3. Add. Parameters (K-filter, K-filter MT, Speed MT).
Tone borders
In this submenu you can change borders of VDI sound sectors according to your major
search targets. Narrowing or widening them you can achieve sound recognition of the
group of targets common to your search area. To exit the submenu press
Tone tuning
In this submenu you can change tonality of identification signals comfortable for
your ear. The bigger number is, the higher the tonality goes. The lowest tonality
corresponds to the iron, the highest one corresponds to large high-conductivity metal
objects. When you change the tonality we suggest you to consider that the tonality of
the threshold tone has its own separate value. It is not recommended to assign this or
close tonality to any group of targets, otherwise its identification signal will merge with
the threshold tone signal and it would be indistinguishable against such background.
Add. Parameters (additional parameters)
These parameters are introduced for additional test by developers and any
change of these parameters without prior consultation may lead to errors in device
operation.

Quick review of settings status.

If you the device had been idle for a long time and
you do not remember the status of its settings, this signature
option will help you. This option lets you check settings of the
device immediately.
AKA LLC +7(495)623-4026 621-0481 http://aka.2000.ru aka_md@mail.ru
Selective Metal Detector SOREX PRO. Operating manual.
To select menu entry and enter the submenu press
and .
To select the submenu parameter press
.
To browse menu
.
and
To exit the submenu
and .
To change
.
.
.
29