Remove The Keypad; Remove The Remote Control Board; Remove The Stand Backstop; Remove The Indicator Light - Haier HL40XSL2 Service Manual

Service Manual
Model No.: LEA40T3

3-6. Remove the Keypad

The Keypad is conglutinated with front frame
, just uncover the keypad gently.
Then remove the keypad.
3-7. Remove the Remote Control
Board
Remove the screw indicated by the red
circles in below picture.
Take out the remote control board.
12

3-8. Remove the Stand backstop

Remove the six screws indicated by the red
circles in below picture.
Take out the stand backstop.

3-9. Remove the indicator light

The indicator light is buckled into the front
frame,remove the clasp indicated by the red
circles in below picture.
Take out the indicator light.