Related Manuals for Haier HLTDC15
Summary of Contents for Haier HLTDC15
- Page 1 HLTDC15/HLTDC19/HLTDC20 LCD TV USER MANUAL Please read this manual carefully before using this TV set and keep it for future reference.
- Page 2 Important Safety Instructions CAUTION: DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit. ATTENTION The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
- Page 3 Important Safety Instructions 10. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.
-
Page 4: Save These Instructions
SAVE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. -
Page 5: Table Of Contents
To users: Thank you for purchasing Before connecting the LCD-TV and turning on the power, please read this book carefully. Please keep this book for later use. If the unit is disabled by an electrostatic discharge, please turn off the power to the unit and turn it back on to reset. CONTENT Safety Notice Items... -
Page 6: Safety Notice Items
Safety Notice Items Incorrect usage may cause fire or electric shock. required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; Please keep this manual for later use;... -
Page 7: Front Panel Controls
Front Panel Controls TV/AV MENU VOL- Control Panel Function 1. Power supply switch 2.TV/AV Selects the input signals: 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5. -
Page 8: Connection Options
Connection Options The above figure is for reference only, connections may differ depending upon the models Antenna Input Connect cable or antenna signals to the TV, either direc- tly or through your cable box. PC Audio Input Connect the audio output from the pc to the audio input port Video Input... -
Page 9: Remote Control Key Functions
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV POWER TV/AV TV/DVD OPEN/CLOSE SCAN RECALL DISPLAY SLEEP MTS/SAP MENU EXIT STOP SETUP PAUSE/STEP FWD . PREV D.MENU REPEAT PLAY/ENTER ANGLE TITLE/PBC SEARCH PROGRAM AUDIO ZOOM... -
Page 10: Remote Control
Remote Control Installing Batteries Remove the battery cover. Insert two size AA batteries matching the +/-polarities of the battery to the +/- marks inside the battery compartment. Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote control away from heat sources or humid areas to ensure... -
Page 11: Connection Instructions
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections... -
Page 12: Pc Setup
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off;... -
Page 13: Vcr Setup
Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off;... -
Page 14: Cable Tv Setup
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). -
Page 15: Basic Operating Instructions
Basic Operating Instructions Turn on the LCD-TV When the POWER POWER TV/AV TV/DVD OPEN/CLOSE SCAN RECALL MUTE DISPLAY is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby SLEEP P.STD... -
Page 16: Select The Tv Channel You Want
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to remote control or on the panel to make a selection. Picture Mode Press P.STD button on the remote control for menu display . -
Page 17: Menu Operations
Menu Operations * In this manual, the OSD (On Screen Display) may be differ from your TV These are examples to illustrate the TV's operation. Press TV/AV to select the input source. The menu for each source is different . 1. -
Page 18: Picture Menu Options Continued
Menu Operations Picture Menu Options continued 2. Press CH+/CH- button to enter the picture menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4. -
Page 19: Sound Menu Options Continued
Menu Operations Sound Menu Options continued You can adjust sound options to the levels you prefer. 2. Press CH+/CH- button to enter the audio menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . -
Page 20: Function Menu Options
Menu Operations Function Menu Options Menu Language Selection The OSD menus can be shown onscreen in the various languages. First select the system language. 1. Press MENU button and VOL+/VOL- until the following menu appears on the screen. 2. Press CH+/CH- button to enter the function menu and to go up and down to select the desired option . -
Page 21: Function Menu Options Continued
Menu Operations Function Menu Options Continued Note: Select CC1 for full translation of the primary language such as English in your area. Select CC2 for secondary language translation such as French or any other language that may be broadcast in your area. 4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. -
Page 22: Tuning Menu Options
Menu Operations Tuning Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen Note: This menu appears only in TV mode . 2. Press CH+/CH- button to enter the tuning menu and to go up and down to select the desired option . -
Page 23: Tuning Menu Options Continued
Menu Operations Tuning Menu Options Continued 4. FINE TUNE : If the image and / or sound received is not very good , you can press CH+/CH- to select FINE TUNE in the menu . Then , press VOL+/VOL- button to adjust and improve the image quality. Do not use this feature unless reception is poor. -
Page 24: Parental Menu Options Continued
Menu Operations Parental Menu Options Continued This function enables you to block certain TV channels in accordance to the requirements established by the FCC. 2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to select the desired option . - Page 25 Menu Operations Parental Menu Options Continued PARENTAL LOCK TECHNOLOGY: The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV PROGRAMS Guide ratings to block certain types of TV programs and movies. To clearly understand TV program rating codes, read the following U.S.
- Page 26 Menu Operations Parental Menu Options Continued To understand clearly about movie rating codes, read the following list: U.S. Movie Rating Chart This means movie is not rated yet. It is pending government rating approval. General Audience-this type of movie rating means all ages admitted to see the movie.
-
Page 27: Dvd Features
DVD Features Basic Playback Preparations Preparations Press the TV/DVD button on the remote control or the TV to enter the DVD status. Basic playback Basic playback 1. Press OPEN/CLOSE to open the disc tray, place a disc in the disc tray. If there is no disc placed on the disc tray in DVD mode, OPEN will display on the screen all the times) There... - Page 28 DVD Features(Continued) Advanced Playback IMPORTANT NOTE: ALL DESCRIBED FUNCTIONS A FOR DVD DISCS. IF YOU PLAY OTHER DISC FORMATS THE OPERATION AND ON SCREEN DISPLAY WILL BE DIFFERENT. CAPTION SUBTITLE Press " SUBTITLE ", the screen will display "SUBTI- TLE 01/XX XXXXX", "01" indicates the ordinal number of this language;...
-
Page 29: Special Function Playback
Special Function Playback JPEG DISC PLAYBACK When a disc containing standard JPEG picture files is inserted into the player, a navigation menu will be displayed automatically. Use the UP and DOWN cursor buttons to select a file then press PLAY/ENTER. The slide show will commence. Press PREVIOUS or NEXT to move between pictures. -
Page 30: Dvd System Setup
DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the SETUP General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b item, then press submenu. PLAY/ENTER 3.Press CH+/- bu to select then press PLAY/ENTER to confirm. 4.Press EXIT or press SETUP repeatedly to exit the set-up menus. - Page 31 DVD System Setup(Continued) DVD System Setup General Setup Page ANGLE MARK: Users can select a particular camera angle when playing a DVD which offers multiple angles. This item allows you to set Angle Mark ON or OFF. On Screen Display (OSD) Language: Users can select on-screen display language.
- Page 32 DVD System Setup(Continued) DVD System Setup SETUP PLAY/ENTER SETUP PLAY/ENTER Preference Page The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. PARENTAL: The parental control function works in conjunction with the different censorship classes...
- Page 33 DVD System Setup(Continued) DVD System Setup SETUP PLAY/ENTER DEFAULT: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. Note: Some functions may not be available depending on the type of disc. ..Preference Page..
- Page 34 Playable Discs The following discs can be played: You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases, their performance may not be consistant or may not even operate at all.
-
Page 35: Disc Protection And Dvd Characteristics
Disc Protection and DVD Characteristics Compare DVD disc with other discs: Encode method Single- side Capacity single- layer 4.7G Playing Time minutes Disc diameter Horizontal resolution Picture proportion Subtitle Language Sound quality Digital/MPEG Analog Double Double- Single- -side side side single double- double-... -
Page 36: Troubleshooting Guide
Troubleshooting Guide To assist in location possible faults use help guide below Troubleshooting No picture, no sound Blank screen No sound Poor sound No picture in some channel No color for some channel program (black and white) Spots with some or all pictures Abnormal functioning Note:... -
Page 37: Specifications
Power consumption Temperature Accessories NOTE Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate. HLTDC15 HLTDC19 NTSC-M 1.5W+1.5W AV input PC input S-VIDEO input PC audio input Headphone output YPbPr input Antenna input... - Page 38 Warranty Warranty Warranty One year parts and Labor Carry in for 27" or less and in home for 32" and above .
- Page 39 V0.1 0090508051C...