Service Manual
Model No.: HLC32K2
3-4. Remove the Power Supply
Module
Remove the four screws indicated by the
red circles in below picture.
3-5. Remove the Mainboard
Remove the four screws indicated by the rred
circles in below picture.
Disconnected the coupler .
Remove the Mainboard.
12
3-6. Remove the Keypad Board
Remove the two screws indicated by the red
circles in below picture.
3-7. Remove the Speaker
3-8. Remove the Remote Control
Remove the two screws indicated by the red
circles in below picture.
Take out the remote control board.