Table of Contents
Advertisement
Setting the Time and Date
On the Function menu, press
or
v
Press
. The Set Time screen is displayed.
t
L
H Y
Pager status
›
Set Time
H_ 00:00| 01/01/00H
fields
J 00:00| --/--/--
SET TIME
Set Time Screen example
Press
to move to the hour field.
s
Press
or
to adjust the hour.
x
w
Press
to move to the first digit of the minutes field.
s
Press
or
to adjust the first digit of the minutes.
x
w
Repeat Steps 5 and 6 to adjust the second digit of the minutes field, the
method of time measurement (
-
,
Press
to accept the time and date changes.
t
Press
or
to move to the desired alert. A sample of each alert is emitted
v
s
as you scroll through the selections.
Press
to accept the selected alert. The pager emits the selected alert (for
t
any selection except
) as it returns to the Status screen.
k
Setting the Pager Alarm
You can set two clock-type alarms:
• One-time only—Specify the time and date.
• Daily—Specify the time only. The alarm expires daily at the same time.
On the Function menu, press
to move to
s
Press
. The Set Time screen is displayed.
t
Press
or
. The Set Alarm screen is displayed.
w
x
L
Pager status
H Y
›
_ 12:05" 05/01/00
Set Alarm
HJ 12:00- --/--/--H
fields
SET ALARM
Set Alarm Screen example
Press
. The alarm indicator (
J
) flashes.
s
to move to
(
).
s
i
SET TIME/ALARM
):)) S
)!/)!
"
or
|
), month, date, and year fields.
(SET TIME/ALARM).
i
!@:)% m
)%/)!
Setting the Pager Alert Mode
The alert can be set as either audible or silent.
On the Function menu, press
displayed:
SET SILENT ALERT
([ f ] to change from silent to audible alert mode).
SET AUDIBLE ALERT
Press
to accept the new alert mode. The pager emits a sample of the new
t
alert.
Setting the Pager Alert Pattern
The pager must be set for an audible alert to select an alert pattern. There are
ten alert pattern options: one standard alert (
(
through
), a chirp alert (
2
8
On the Function menu, press
Press
. The Alert pattern screen is displayed.
t
7
8
Press
to change the indicator from
w
Press
to move to the hour field.
s
Press
or
to adjust the hour.
x
w
Repeat Steps 6 and 7 until you have set both digits of the minutes field and
the method of time measurement (
only alarm, also use Steps 6 and 7 to set the month, date, and year fields. If
this is a daily alarm, leave the dashes (
next step.
Note: Only
or
AM
PM
measurement, you cannot change it here.
Press
to accept the alarm setting.
t
In the upper-left corner of the pager,
When the alarm expires,
audible alert until you press a button. If it is a one-time alarm,
from the Status screen after you press a button.
9
10
until one of two possible prompts is
v
([
] to change from audible to silent alert mode) or
k
), seven different pleasing alerts
1
O
), and no alert (
).
k
to move to
(
).
s
e
CHOOSE ALERT
1 2 3 4 5 6 7 8 O
k
STANDARD ALERT
Alert Pattern Screen example
J
(alarm off) to
r
,
, or
|
) field. If this is a one-time
AM
PM
) in the date fields and go to the
--
can be changed. If you are using the
R
is displayed, indicating the alarm is set.
R
flashes and the pager either vibrates or emits an
(alarm on).
|
time
R
disappears
Advertisement
Table of Contents
Need help?
Do you have a question about the Advisor Graphix CP1250 and is the answer not in the manual?