Align the grooves on the battery door with the grooves on the pager housing
and slide the battery door closed.
Slide the battery door lock toward the bottom of the pager to lock the
battery door.
Control Buttons and Status Screen
H Y L›):)) m )%/)!
Pager
Status
DDDD
IbIIIIIILI55555555
R q
Folders
eijmkezBqqhaob
Directional
Buttons
On/Read
Used to turn the pager on and to read a message.
u
Function/Select Used to display the Function menu and to select
t
pager settings.
Directional
Used to move around the display and through
x s
v w
menus.
Turning Your Pager Off
From any screen, press and release
flashing.)
to move to e (
Press
).
v
TURN OFF
Press
to turn the pager off. The
t
Press
again. The pager is now off and the screen is blank.
t
Backlight
Your pager's display can be illuminated in low light conditions. You can
manually turn the backlight on and off by pressing and holding
two seconds.
Sending a Test Message
After you have read this guide and your pager has been activated by your
service provider, send yourself a test message. If you have any problems
sending or receiving your test message, contact your service provider.
a
b
h
o
ESCAPE
On/Read
Button
Function/Select
Button
until
is displayed. (
is
t
ESCAPE
z
prompt is displayed.
TURN OFF?
for at least
t
Turning Your Pager On
Press
to turn your pager on. A start-up message is momentarily
u
displayed and your pager activates the currently selected alert.
Press any button to stop the start-up alert.While the pager is on and no
activity is taking place, the Status screen is displayed.
H Y
Power
On
Alert
Mode
(Audible)
3
4
The Function Menu
The Function menu provides access to many of the pager's features through a
series of icons and prompts. Press
example is shown below.
Note: Some icons may or may not be displayed on your pager, depending on
your pager's features and whether or not it has messages.
Folders
Function prompt
Functions
Getting Around the Function Menu
Press either
or
to move within the Function menu.
v
s
Note: To exit from any menu without accepting changes, press
5
6
Battery status
Time
Day and Date
(Full)
L
m
›
):))
)%/)!
(Blank screen)
Status Screen example
to access the Function menu. An
t
R q h a o b
ESCAPE
eijmkezBqhaobK
Function Menu example
.
u
Need help?
Do you have a question about the Advisor Graphix CP1250 and is the answer not in the manual?