Yamaha wr450fb Owner's Manual page 38

INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
1. Move the sidestand down.
1
2. Make sure that the engine stop switch is set to "
3. Push the main switch to "ON".
4. Shift the transmission into the neutral position.
2
5. Push the start switch.
Does the engine start?
3
4
With the engine still running:
6. Move the sidestand up.
5
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
6
Does the engine stall?
7
After the engine has stalled:
8
10. Move the sidestand up.
11. Keep the clutch lever pulled.
9
12. Push the start switch.
Does the engine start?
The system is OK. The motorcycle can be ridden.
".
YES NO
YES NO
YES NO
WARNING
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
4-20