Yamaha wr450fb Owner's Manual page 21

1 2
3
1. Stopwatch indicator " "
2. Tripmeter A indicator " "/Distance-com-
pensation tripmeter " "
3. Tripmeter B indicator " "
TIP

The multi-function display can be
set to the basic mode or the mea-
surement mode.

Tripmeter A will automatically re-
set to zero when changing from
the basic mode to the measure-
ment mode or vice versa.
Basic mode:

a speedometer

an odometer

two tripmeters (which show the
distance traveled since they were
INSTRUMENT AND CONTROL FUNCTIONS
last set to zero)

a clock
Measurement mode:

a speedometer

a distance-compensation tripme-
ter (which shows the accumulated
distance traveled since set to zero
and which can be calibrated to pro-
vide a more accurate tripmeter
reading)

a stopwatch (which shows the time
that has been accumulated since
the start of stopwatch measure-
ment)
TIP

Be sure to push the main switch to
"ON" before using the "SLCT 1",
"SLCT 2" and "RST" buttons.

When the main switch is pushed to
"ON", all of the display segments
of the multi-function display will ap-
pear and then disappear, in order
to test the electrical circuit.
4-3
Basic mode
Odometer and tripmeter modes
Push the "SLCT 2" button to switch the
display between the odometer mode
and the tripmeter modes A and B in the
following order:
odometer  tripmeter A  tripmeter B
 odometer
1
1. Tripmeter A indicator " "
2
3
4
5
6
7
8
9