Disassembly And Reassembly - Robin DY23-2D Service Manual

5. DISASSEMBLY AND REASSEMBLY
5- 1
PREPARATIONS AND
SUGGESTIONS
/ -
(1) When disassembling the engine, memorize well the locations of individual parts
so
that they can be reassembled correctly. If you are uncertain of identifying some parts,
it is suggested that tags to be attached to them.
(2) Have boxes ready to keep disassembled parts by group.
(3) To prevent missing and misplacing, temporarily assemble as much a s possible each
group or set of disassembled small parts such as bolts and nuts,etc.
(4) Carefully handle disassembled parts, and clean them with washing oil.
(5) Use the correct tools in the
correct way.
5 - 2
SPECIAL
TOOLS
Tool No.
Use
Tool
209- 95001
-
07 For pulling off the flywheel Flywheel puller with bolt
228- 95003-
07
For placing piston ring
Piston ring cqmpressor
.
f
PISTON RING COMPRESSOR
FLYWHEEL PULLER
/ -
FIG. 21
- 14
-