5 - 4 - 8 FUEL INJECTION PUMP
(1) Measure the distance
between the face
of the cam base and the pump
mounting face of the crankcase.
(See Fig.
54.)
Select the gasket (injection pump)
of
the proper thickness
so as the distance
t o be adjusted to
66
-+
0.05mm.
The gasket (injection pump)
of three
different thickness are available.
(T
= 0.1
mm,
T
=
0.2 mm and T
=
0.3 mm)
(2)
Apply sealant
(THREE BOND
1215)
to the both side of the gasket (injection
pump).
(3) Install the fuel injection pump to the
crankcase checking the control rack
of the injection pump to engage with
the governor lever correctly.
(See Fig. 55.)
FIG. 54
/-
FIG.
55
,
-
34
-