Disassembly And Reassembly; Preparations And Suggestions; Special Tool - Robin EC03ER Service Manual

3. DISASSEMBLY AND REASSEMBLY
3- 1 PREPARATIONS AND SUGGESTIONS
(1)
When disassembling an engine , memorize well
the locations of individual parts so that they
can be reassembled correctly. If you are uncertain of identifying some
parts,
it is suggested
that tags to be attached to them.
(2) Have boxes ready to keep disassembled parts by group.
(3) To prevent missing and misplacing small parts such as bolts and nuts, etc., temporarily
assemble as much as possible in each group or set.
(4)
Carefully handle disassembled parts, and clean them with washing oil.
(5) Use correct tools in correct way.
(6) Standard tools required for disassembling and reassembling
:
a) Work table
b) Washing pan
c) Disassembling tools
d)
Washing oil (kerosene or light oil)
e) Emery paper, waste '.cloth
(7) Before starting disassembly of the engine, drain fuel.
3-2 SPECIAL TOOL
Tool No.
Use Tool
560 - 90020 - 00
For pulling off the flywheel and clutch
Clutch puller
" - - ( N O T E ] -
Use tKree (3) M5
X
40mm bolts
with the puller to remove clutch,
and two (2) M6
X
4Omm bolts to
remove flywheel.
Fig. 1
- 3 -