Chapter 5: Configuring Tcp/Ip; Configuring Tcp/Ip In Windows Xp - Motorola CPEI 890 Series User Manual

Motorola network router user manual

Hide thumbs Also See for CPEI 890 Series:

Table of Contents

Configuring TCP/IP

Chapter 5: Configuring TCP/IP

This section contains two examples of configuring TCP/IP in a Windows environment.

Most computers already have the TCP/IP configuration enabled. Use the following

procedures to verify that the configuration is set up. Configure all client computers on

your network for TCP/IP (the protocol that controls communication among computers).

Two examples are provided in this document:

• Configuring TCP/IP in Windows Vista

Configuring TCP/IP in Windows XP

1. On the Windows desktop, click Start to display the Start window:

Figure 5-1: Windows XP Start Window

2. Click Control Panel to display the Control Panel window. The display varies,

JAN 2011

NOTE

Follow the instructions in your computer user manual for other Operating

Systems.

depending on your Windows XP view options. If the display is a Category view as

shown in Figure 5-2, continue with Step 3. Otherwise, skip to Step

5-1

Table of Contents