Table of Contents
Advertisement
Configuring TCP/IP
Chapter 5: Configuring TCP/IP
This section contains two examples of configuring TCP/IP in a Windows environment.
Most computers already have the TCP/IP configuration enabled. Use the following
procedures to verify that the configuration is set up. Configure all client computers on
your network for TCP/IP (the protocol that controls communication among computers).
Two examples are provided in this document:
• Configuring TCP/IP in Windows XP
• Configuring TCP/IP in Windows Vista
Configuring TCP/IP in Windows XP
1. On the Windows desktop, click Start to display the Start window:
Figure 5-1: Windows XP Start Window
2. Click Control Panel to display the Control Panel window. The display varies,
68P09301A65-A
FEB 2009
NOTE
Follow the instructions in your computer user manual for other Operating
Systems.
depending on your Windows XP view options. If the display is a Category view as
shown in Figure 5-2, continue with Step 3. Otherwise, skip to Step
5
5.
5-1
Advertisement
Table of Contents
