Chapter 5: Configuring Tcp/Ip; Configuring Tcp/Ip In Windows Xp - Motorola CPEI 885 Series User Manual

Configuring TCP/IP

Chapter 5: Configuring TCP/IP

This section contains two examples of configuring TCP/IP in a Windows environment.
Most computers already have the TCP/IP configuration enabled. Use the following
procedures to verify that the configuration is set up. Configure all client computers on
your network for TCP/IP (the protocol that controls communication among computers).
Two examples are provided in this document:

• Configuring TCP/IP in Windows XP

• Configuring TCP/IP in Windows Vista
Configuring TCP/IP in Windows XP
1. On the Windows desktop, click Start to display the Start window:
Figure 5-1: Windows XP Start Window
2. Click Control Panel to display the Control Panel window. The display varies,
DEC 2010
NOTE
Follow the instructions in your computer user manual for other Operating
Systems.
depending on your Windows XP view options. If the display is a Category view as
shown in Figure 5-2, continue with Step 3. Otherwise, skip to Step
5
5.
5-1