Use The Prosafe Plus Utility To Set Up Rate Limiting - NETGEAR GSS108E User Manual

ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
6. Select one or more ports.
7. In the Ingress Rate menu, select the maximum rate.
8. In the Egress Rate menu, select the maximum rate.
9. Click the Apply button.
Your settings are saved.

Use the ProSAFE Plus Utility to Set Up Rate Limiting


To set up rate limiting:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status page displays.
6. Select QoS > Rate Limit.
7. Select one or more ports.
Optimize Performance With Quality of Service
36