Interface Connector Specifications; W24 Stand Alone Model; W24 Host Interface Connector Options; W24 Cellular Interface Connector Options - Motorola W24 Technical Information

Interface Connector Specifications

A Stand Alone model of the W24 is shown in
Figure 4-2: W24 Stand Alone Model
Interface Connector Specifications
The W24 uses a single 70-pin, 0.5 mm pitch, board to board connector for the host interface, as
described in
Table 4-2
48
Table 4-1.
Table 4-1: W24 host interface connector options
W24 Connector
Molex 53748-0708 Molex 52991-0708
describes the cellular interface connector options.
Table 4-2: W24 cellular interface connector options
W24 Connector
Molex 52991-0708 Molex 53748-0708
Module Hardware Description
Figure 4-2.
Mating Connector Stacking Height
3.0 mm
Mating Connector Stacking Height
4.5 mm
May 31, 2008