Motorola W24 Technical Information page 25

Motorola wi-fi module developer's guide
Table of Contents

Advertisement

Environmental
Operational temperature:
Storage temperature:
Performance
Operating voltage:
Current consumption:
Maximum Tx peak output
power:
Interfaces
Connectors:
Serial Ports:
Data Features
Data Throughput:
Control/Status Indicators
Wakeup
Antenna Detect
Reset (Ready)
TX enable
Features over RS232
Embedded TCP/IP stack
AT Command Set
Accessories
Developer Kit
May 31, 2008
Table 1-1: Product Specifications (Cont.)
-20°C to +60°C
-40°C to +85°C
3.3 - 4.2 V
250mA
25 dBm according to 47 CFR 15.247 (b) (3) & RSS-210
Section A8.4
70-pin, board-to-board (host interface)
70-pin, board-to-board (G24 interface) not available on all
models
MMCX RF Connector
USB:
USB full-speed device port, Rev. 2.0
USB full-speed host port, Rev. 2.0
Host UART Interface:
BR from 2400 bps to 230.4 kbps
Extended bit rates, up to 3Mbps
Modem UART Interface:
BR from 2400 bps to 230.4 kbps
Extended bit rates, up to 3Mbps
Via UART:
400 kbps upload / 1 Mbps download (security disabled)
100 kbps upload/ 300 kbps download (security enabled)
Via USB:
800 kbps upload /download (security disabled)
100 kbps upload/ 300 kbps download (security enabled)
(Available only when coupled with G24)
TM
AT+i
commands (ConnectOne's AT+i
sion to the standard AT command set that allows program-
ming, monitoring, communication activation and control.
W24 Does not support the standard AT Commands set.
Module Hardware Description
TM
) is an exten-
3

Advertisement

Table of Contents
loading

Table of Contents