Product Information; Models And Features; Model Identification; Service Information - Amana CDU300DB Service Manual

Product Information

!
WARNING
Disconnect power and close water supply valve
before servicing dishwasher. Never energize
electrical power to dishwasher with any panels
removed.

Models and Features

All dishwasher models use one piece of channel steel
as the main frame around tub and the two front legs.
Rear legs are channel steel, and a steel bottom liner
stiffens and supports tub bottom. A cross brace is
used at the front for stiffness. Tub bottom brace
supports the tub when filled with hot water and
prevents deformation.
!
WARNING
All ground wires removed during servicing must be
reconnected to insure dishwasher is properly
grounded.
Tub is not replaceable. If defective, the entire
dishwasher must be replaced.
The models all have 120°F inlet water capability.
Some models use a water heat thermostat and cycle
extender to extend cycle time for water temperatures
under 140°F. ADU3000, ADU5000, and ADU520 units
use a timed sytem.
RS3300002 Rev. 0

Model Identification

Rating label, which gives the model number, is
located on the left side of the tub at the front, and is
visible when the door is opened. This series of models
will have "P" numbers which identify the product.

Service Information

Two different pieces of service literature will be
available. The mini-manual comes with the product.
This piece contains a schematic, cam chart, and
abbreviated service information.
This service manual will contain all pertinent service
reference information including schematics.

Mini-Manual Location

The mini-manual is accessible when the access panel
is removed.
The folded mini-manual is in a 6-inch x 3 1/4-inch
envelope, which is placed between the tub and metal
plate, on the right side.
4 August 1997