Table of Contents
Advertisement
STEP 3 (SEE DIAGRAM 3)
A.) Insert a M12 x 4 7/8" Hex Bolt (#42) through the Left Butterfly (#10). Place a M12
Regular Nut (#43) onto the Bolt. Then insert the Bolt through the holes on the Rear
Upright Beam (#1). Secure the Bolt with a M12 Lock Knob (#29) behind the Upright
Beam.
B.) Insert a Butterfly Foam Tube (#14) through the holes on the Left Butterfly. Push a
Butterfly Large Foam Roll (#21) onto the Tube. Attach a Spring Clip (#25) to the weight
post on the Left Butterfly.
C.) Repeat the same Procedure A and B to install the Right Butterfly (#11).
8
DIAGRAM 3
Advertisement
Table of Contents
