Table of Contents
Advertisement
STEP 4
(SEE DIAGRAM 4)
A.) Attach the Backrest Supports (#8) onto both ends of the Pivot on the Main Seat Support
(#6). Place the other ends rest against the Backrest Adjustment Bar (#4).
B.) Attach the Backrest Board (#18) onto the Backrest Supports. Secure it with four M6 x 1
5/8" Hex Bolts (#41) and ∅ ½" Washers (#45).
C.) Place the Seat Pad (#19) onto the bracket on the Main Seat Support. Secure it with four
M6 x 1 5/8" Hex Bolts (#41) and ∅ ½" Washers (#45).
9
DIAGRAM 4
Advertisement
Table of Contents
