Before You Begin - Motorola SURFboard Cable Modem User Manual

Introduction

Before You Begin

Home Print
Installation & Configuration
Before You Begin
Before you begin the installation, check that you received the following items with your
SURFboard cable modem:
Item
Power cord
10/100Base-T
Ethernet cable
USB cable
SURFboard Cable
Modem CD-ROM
You will need 75-ohm
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
the cable modem. The coaxial cable and RF splitter are available at consumer electronic
stores.
X
Exit
Troubleshooting
Description
Connects the SURFboard cable modem to the AC
electrical outlet
Connects to the
Connects to the
Contains the User Guide and USB drivers
coaxial cable (coax) with F-type connectors to connect your cable
splitter and two additional coaxial cables to use both the TV and
4
SURFboard Cable Modem User Guide
FAQ Glossary License
Ethernet port
USB port