Motorola SURFboard Cable Modem User Manual page 30

Introduction Before You Begin
Home Print
Installation & Configuration
Configuring TCP/IP in Windows 95, 98, or Me, continued
10
Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose
the one for the Ethernet card or USB port connected to the cable modem.
11
Click Properties. The TCP/IP window is displayed.
12
Click the IP Address tab.
13
Click Obtain an IP address automatically.
14
Click OK to accept the TCP/IP settings.
15
Click OK to close the Network window.
16
Click OK when prompted to restart your computer and click OK again.
When you complete TCP/IP configuration, go to
Windows 95, 98, or Me"
X
Exit
Troubleshooting
on page 30.
25
SURFboard Cable Modem User Guide
FAQ Glossary
"Verifying the IP Address in
License