Automatic Transmission - Toyota 2000 Tundra Owner's Manual

Automatic transmission

Parking, engine starting and
key removal position
Reverse position
Neutral position
Normal driving position
Position for engine braking
Position for
braking than that in "2" position
With the brake pedal depressed,
shift while pulling the selector lever
toward you. (The ignition switch
must be in "ON" or "ACC" position.)
Shift while pulling the selector
lever toward you
Shift normally
Vehicles with cruise control—When the cruise control is being used, even if you downshift the transmission by turning off the overdrive
switch, engine braking will not be applied because the cruise control is not cancelled. For ways to decrease the vehicle speed, see
"Cruise control" in this chapter.
96
stronger engine
TUNDRA (34413U)
Overdrive switch
For selecting either a three- speed or
four- speed transmission
"ON" position
(Shifting into
overdrive possible)
"OFF" position
(Shifting into overdrive
not possible)
"O/D OFF" indicator light
Shows the overdrive switch
is in "OFF" position