Do not fill a fuel container on a
D
plastic truck bed liner, a rubber
truck bed mat, or any other insulat-
ing
material.
A
static
electricity
charge could cause a spark and fire
hazard. The proper procedure is to
place an approved fuel container on
the ground away from the truck for
filling.
2. To remove the fuel tank cap, turn
the
cap
slowly
counterclockwise,
then pause slightly before removing
it. After removing the cap, hang it
on the cap hanger.
It is not unusual to hear a slight swoosh
when the cap is opened. When installing,
turn the cap clockwise till you hear a
click.
If the cap is not tightened securely, the
malfunction
indicator
lamp
comes
Make sure the cap is tightened securely.
The indicator lamp goes off after driving
several times. If the indicator lamp does
not go off, contact your Toyota dealer as
soon as possible.
TUNDRA (34413U)
CAUTION
Make sure the cap is tightened se-
D
curely to prevent fuel spillage in
case of an accident.
Use only a genuine Toyota fuel tank
D
cap for replacement. It has a built-
in check valve to reduce fuel tank
vacuum.
on.
17