When the garage door opener transmitter
is properly installed, you can operate the
transmitter by pushing the center panel of
the cover.
If the center panel does not contact with
your garage door opener transmitter:
Check to see if spacer is on the cor-
D
rect pin.
Attach another spacer to the top of
D
original spacer. Check operation. If re-
quired, continue to add spacers until
contact is achieved.
If the transmitter is clattering during driv-
ing, fill in a piece of felt or pad to prevent
the transmitter from clattering.
TUNDRA (34413U)
CAUTION
To reduce the chance of injury in
D
case of an accident or a sudden
stop, always keep the garage door
opener box closed while driving.
Keep the remained spacers away
D
from children.
157