Table of Contents
Advertisement
1 Coupler
2 Trailer ball
MATCHING TRAILER BALL HEIGHT TO
TRAILER COUPLER HEIGHT
No matter which class of tow hitch ap-
plies, for a safe trailer hookup, the trailer
ball setup on must be the proper height
for the coupler on the trailer.
BRAKES AND SAFETY CHAINS
Toyota recommends trailers with brakes
D
that conform to any applicable federal
and state/provincial regulations.
A safety chain must always be used
D
between the towing vehicle and the
trailer. Leave sufficient slack in the
chain for turns. The chain should cross
under the trailer tongue to prevent the
tongue from dropping to the ground in
case it becomes damaged or sepa-
rated. For correct safety chain proce-
dures,
follow
the
hitch
or
manufacturer's recommendations.
TUNDRA (34413U)
CAUTION
If the total trailer weight exceeds
D
453 kg (1000 lb.), trailer brakes are
required.
Never tap into your vehicle's hy-
D
draulic system as it would lower its
braking effectiveness.
Never tow a trailer without using a
D
safety chain securely attached to
both the trailer and the vehicle. If
damage occurs to the coupling unit
or hitch ball, there is danger of the
trailer wandering over into another
lane.
TIRES
Ensure that your vehicle's tires are
trailer
D
properly inflated. See Chapter 7- 2 for
instructions.
The trailer tires should be inflated to
D
the pressure recommended by the trail-
er manufacturer in respect to the total
trailer weight.
193
Hide quick links:
Advertisement
Table of Contents
