Toyota 2000 Tundra Owner's Manual page 194

TRAILER BALL
Follow these easy steps to properly deter-
mine the correct trailer ball for your ap-
plication:
1. Determine the correct trailer ball size
for the trailer coupler. Most couplers
are stamped with the required trailer
ball size. The sizes you will most likely
find stamped on the coupler are:
Trailer class Typical trailer ball size
III and IV 2—5/16 in.
II 2 in.
I 1—7/8 in.
2. Select the appropriate trailer ball to
match or exceed the gross
weight rating of the trailer. The trailer
ball load rating should be printed on
the top of the ball.
3. When mounted in the ball mount, the
threaded ball shank must protrude be-
yond the bottom of the lock washer
and nut at least 2 threads. The trailer
ball shank must be matched to the ball
mount hole diameter size.
192
BUMPER TOWING
The rear bumper of
equipped with a hole to install a trailer
trailer ball. The maximum gross trailer weight is
2268 kg (5000 lb.).
CAUTION
The maximum gross trailer weight
(trailer weight plus
when towing with the bumper must
never exceed 2268 kg (5000 lb.).
TUNDRA (34413U)
FIFTH WHEEL TRAILER
your vehicle is
When towing a fifth wheel trailer, be
careful not to hit the cabin or deck
by the trailer while making a sharp
turn.
cargo weight)
NOTICE