Hooking Up The Printer & Computer; Communicate With The Printer; Before Installation - Paxar 9662 User Manual

Hooking up the Printer & Computer
Connecting the Printer to Your Host
1. You can connect the printer with any standard Centronics cable to
the parallel port of the host computer.
2. Alternatively you can connect the printer with a serial cable to the
RS232C port of your computer or terminal. (for PC compatibles, the
RS232C port is COM1, COM2 or COM3.)
Note :
Using Centronics allows for a much higher communication speed than
the use of a serial.
PC
PC
RS232 Serial
Port
33
Centronics

Communicate with the Printer

Communicate with the Printer
The bundled printer driver can be applied to all the applications under
Windows 2000/98/95, and Windows NT. Through this driver you may run
any popular software applications e.g. MS-Word and print out the
contents by this label printer as long as they are for Windows.

Before installation

1. Check the contents of the driver to ensure it is complete.
2. Make a backup copy of this driver.
3. Read the README.TXT file for installation guide and change notices.
34